Supported vehicles › Porsche › Macan

Porsche · Cars & LCV

Porsche Macan tune files, remaps & software solutions

14 engines · 2013–2021 · 14 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Porsche Macan built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Porsche Macan 2.0 TFSI petrol

Years2013
Stock power252 hp
Stock torque370 Nm
ECU / TCU types5
Stage 1 — typical+15% power / +20% torque → ~290 hp / 445 Nm

Controllers and read methods

  • Continental Simos18.1 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.10 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.2 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.3 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.6 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.0 TFSI EU6 OPF petrol

Years2018
Stock power245 hp
Stock torque370 Nm
ECU / TCU types6
Stage 1 — typical+15% power / +20% torque → ~280 hp / 445 Nm

Controllers and read methods

  • Continental Simos18.1 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.10 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.2 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.3 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.6 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.0 TFSI EU6 OPF (T) petrol

Years2021
Stock power265 hp
Stock torque400 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~305 hp / 480 Nm

Controllers and read methods

  • Continental Simos19.3 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.0 TSI petrol

ECU / TCU types2
Stage 1 — typical+15% power / +20% torque

Controllers and read methods

  • Simos 18.10 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOT
  • Simos 18.X AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.9 Turbo petrol

ECU / TCU types2
Stage 1 — typical+15% power / +20% torque

Controllers and read methods

  • Bosch MG1CS002 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch MG1CS002 Gen2 / AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.9 V6 Turbo (GTS) petrol

Years2018–2021
Stock power380–440 hp
Stock torque520–550 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~435–505 hp / 625–660 Nm

Controllers and read methods

  • Bosch MG1CS002 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.9 V6 Turbo (S) petrol

Years2021
Stock power380 hp
Stock torque520 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~435 hp / 625 Nm

Controllers and read methods

  • Bosch MG1CS002 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 2.9 V6 Turbo (Turbo) petrol

Years2018
Stock power440 hp
Stock torque550 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~505 hp / 660 Nm

Controllers and read methods

  • Bosch MG1CS002 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 3.0 T petrol

Years2013
Stock power340 hp
Stock torque460 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~390 hp / 550 Nm

Controllers and read methods

  • Continental SDI10.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 3.0 T GTS petrol

Years2013
Stock power360 hp
Stock torque500 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~415 hp / 600 Nm

Controllers and read methods

  • Continental SDI10.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 3.0 TDI diesel

Years2013
Stock power211–258 hp
Stock torque580 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~255–310 hp / 740 Nm

Controllers and read methods

  • Bosch EDC17CP44 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 3.0 V6 Turbo (S) petrol

Years2018
Stock power354 hp
Stock torque480 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~405 hp / 575 Nm

Controllers and read methods

  • Bosch MG1CS002 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 3.6T petrol

Years2013
Stock power400 hp
Stock torque550 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~460 hp / 660 Nm

Controllers and read methods

  • Continental SDI10.1 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD
  • Continental SDI10.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan 3.6T Performance petrol

Years2013
Stock power440 hp
Stock torque600 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~505 hp / 720 Nm

Controllers and read methods

  • Continental SDI10.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Porsche Macan FAQ

Do you have a tune file for the Porsche Macan?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Porsche Macan file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Porsche Macan Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Porsche modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Porsche Macan read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.