Supported vehicles › Mercedes › GLE W167

Mercedes · Cars & LCV

Mercedes GLE W167 tune files, remaps & software solutions

19 engines · 2018–2023 · 12 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Mercedes GLE W167 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Mercedes GLE W167 300d (2.0) diesel

Years2018
Stock power245 hp
Stock torque500 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~295 hp / 640 Nm

Controllers and read methods

  • Bosch MD1CP001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 300d MHEV diesel

Years2023
Stock power265 hp
Stock torque550 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~320 hp / 705 Nm

Controllers and read methods

  • Bosch MD1CP010 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch MD1CP011 TC387 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 350 MHEV petrol

Years2023
Stock power255 hp
Stock torque400 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~270 hp / 420 Nm

Controllers and read methods

  • Bosch MG1CS100 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 350d (2.9) diesel

Years2018
Stock power272 hp
Stock torque600 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~325 hp / 770 Nm

Controllers and read methods

  • Bosch MD1CP001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 350de (2.0) hybrid_diesel

Years2018
Stock power320 hp
Stock torque700 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~385 hp / 895 Nm

Controllers and read methods

  • Bosch MD1CP001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 350de PHEV hybrid_diesel

Years2023
Stock power333 hp
Stock torque750 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~400 hp / 960 Nm

Controllers and read methods

  • Bosch MD1CP010 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch MD1CP011 TC387 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 350e Hybrid (2.0) hybrid_petrol

Years2018
Stock power333 hp
Stock torque700 Nm
ECU / TCU types4
Stage 1 — typical+15% power / +20% torque → ~385 hp / 840 Nm

Controllers and read methods

  • Bosch MED17.7.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch MED17.7.7 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGS
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Continental VGS4-NAG2 TCU TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 400d (2.9) diesel

Years2018
Stock power330 hp
Stock torque700 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~395 hp / 895 Nm

Controllers and read methods

  • Bosch MD1CP001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 400e hybrid_petrol

Years2018–2023
Stock power381 hp
Stock torque600 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~400 hp / 630 Nm

Controllers and read methods

  • Bosch MED17.7.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 400e PHEV hybrid_petrol

Years2023
Stock power381 hp
Stock torque650 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~400 hp / 685 Nm

Controllers and read methods

  • Bosch MG1CS100 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 43 AMG (3.0T) petrol

Years2018
Stock power390 hp
Stock torque520 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~450 hp / 625 Nm

Controllers and read methods

  • Bosch MED17.7.3.1 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 450 AMG (3.0T) MHEV petrol

Years2018
Stock power367 hp
Stock torque500 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~420 hp / 600 Nm

Controllers and read methods

  • Bosch MG1CP002 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 450 MHEV petrol

Years2023
Stock power381 hp
Stock torque500 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~400 hp / 525 Nm

Controllers and read methods

  • Bosch MG1CS046 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 450e PHEV hybrid_petrol

Years2023
Stock power381 hp
Stock torque650 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~400 hp / 685 Nm

Controllers and read methods

  • Bosch MG1CS100 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 53 AMG (3.0T) petrol

Years2018
Stock power435–457 hp
Stock torque520 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~500–525 hp / 625 Nm

Controllers and read methods

  • Bosch MG1CP002 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 53 AMG PHEV hybrid_petrol

Years2023
Stock power585 hp
Stock torque750 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~615 hp / 790 Nm

Controllers and read methods

  • Bosch MG1CS046 TC389 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 580 (4.0T) petrol

Years2018
Stock power489 hp
Stock torque700 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~560 hp / 840 Nm

Controllers and read methods

  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 63 AMG (4.0T) petrol

Years2018
Stock power571 hp
Stock torque750 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~655 hp / 900 Nm

Controllers and read methods

  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 63 AMG S (4.0T) petrol

Years2018
Stock power612 hp
Stock torque850 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~705 hp / 1020 Nm

Controllers and read methods

  • Bosch MED17.7.5 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch VGS-NAG3 TCU SH72560 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes GLE W167 FAQ

Do you have a tune file for the Mercedes GLE W167?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Mercedes GLE W167 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Mercedes GLE W167 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Mercedes modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Mercedes GLE W167 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.