Supported vehicles › Mercedes › B W247

Mercedes · Cars & LCV

Mercedes B W247 tune files, remaps & software solutions

13 engines · 2019–2019 · 5 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Mercedes B W247 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Mercedes B W247 160 (1.3T) petrol

Years2019
Stock power109 hp
Stock torque180 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~115 hp / 190 Nm

Controllers and read methods

  • Continental EMS71 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD-REMOTE-UNLOCK

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 160d (1.5) diesel

Years2019
Stock power95 hp
Stock torque240 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~115 hp / 305 Nm

Controllers and read methods

  • Bosch MD1CS006 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 180 (1.3T) petrol

Years2019
Stock power136 hp
Stock torque200 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~155 hp / 240 Nm

Controllers and read methods

  • Continental EMS71 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD-REMOTE-UNLOCK

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 180 MHEV petrol

Years2019
Stock power136 hp
Stock torque230 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~145 hp / 240 Nm

Controllers and read methods

  • Bosch MG1CS701 TC387 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 180d (1.5) diesel

Years2019
Stock power116 hp
Stock torque260 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~140 hp / 335 Nm

Controllers and read methods

  • Bosch MD1CS006 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 200 (1.3T) petrol

Years2019
Stock power163 hp
Stock torque250 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~185 hp / 300 Nm

Controllers and read methods

  • Continental EMS71 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD-REMOTE-UNLOCK

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 200 MHEV petrol

Years2019
Stock power163 hp
Stock torque270 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~170 hp / 285 Nm

Controllers and read methods

  • Bosch MG1CS701 TC387 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 200d (2.0) diesel

Years2019
Stock power150 hp
Stock torque320 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~180 hp / 410 Nm

Controllers and read methods

  • Bosch MD1CP001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 220 (2.0T) petrol

Years2019
Stock power190 hp
Stock torque300 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~200 hp / 315 Nm

Controllers and read methods

  • Bosch MED17.7.7 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 220d (2.0) diesel

Years2019
Stock power190 hp
Stock torque400 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~230 hp / 510 Nm

Controllers and read methods

  • Bosch MD1CP001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 250 (2.0T) petrol

Years2019
Stock power224 hp
Stock torque350 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~260 hp / 420 Nm

Controllers and read methods

  • Bosch MED17.7.7 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGS

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 250e (1.3T) hybrid_petrol

Years2019
Stock power218 hp
Stock torque450 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~250 hp / 540 Nm

Controllers and read methods

  • Continental EMS71 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD-REMOTE-UNLOCK

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 250e PHEV hybrid_petrol

Years2019
Stock power218 hp
Stock torque450 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~230 hp / 475 Nm

Controllers and read methods

  • Bosch MG1CS701 TC387 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Mercedes B W247 FAQ

Do you have a tune file for the Mercedes B W247?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Mercedes B W247 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Mercedes B W247 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Mercedes modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Mercedes B W247 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.