Supported vehicles › Massey Ferguson › Mf 7600

Massey Ferguson · Agricultural

Massey Ferguson Mf 7600 tune files, remaps & software solutions

11 engines · 2012–2013 · 1 ECU/TCU type · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Massey Ferguson Mf 7600 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Massey Ferguson Mf 7600 6.6L I6 diesel

Years2013
Stock power138–212 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~155–235 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 7.4L I6 diesel

Years2013
Stock power232–252 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~260–280 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7614 6.6l diesel

Years2012
Stock power140 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~155 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7615 6.6l diesel

Years2012
Stock power150 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~170 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7616 6.6l diesel

Years2012
Stock power160 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~180 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7618 6.6l diesel

Years2012
Stock power175 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~195 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7619 6.6l diesel

Years2012
Stock power185 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~205 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7620 6.6l diesel

Years2012
Stock power200 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~225 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7622 7.4l diesel

Years2012
Stock power215 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~240 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7624 7.4l diesel

Years2012
Stock power235 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~265 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 MF 7626 Dyna-6 7.4l diesel

Years2013
Stock power256 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~285 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson Mf 7600 FAQ

Do you have a tune file for the Massey Ferguson Mf 7600?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Massey Ferguson Mf 7600 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Massey Ferguson Mf 7600 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Massey Ferguson modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Massey Ferguson Mf 7600 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.