Supported vehicles › Massey Ferguson › COMBINES

Massey Ferguson · Agricultural

Massey Ferguson COMBINES tune files, remaps & software solutions

9 engines · 2012–2018 · 2 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Massey Ferguson COMBINES built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Massey Ferguson COMBINES 9565 9.8l diesel

Years2018
Stock power466 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~520 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 7370 8.4l diesel

Years2012
Stock power360 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~405 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 7382 8.4l diesel

Years2018
Stock power404 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~450 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 9520 8.4l diesel

Years2018
Stock power318 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~355 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 9560 CAT 9.8l diesel

Years2016
Stock power466 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~520 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 9790 ATR II 8.4l diesel

Years2013
Stock power385 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~430 hp

Controllers and read methods

  • Bosch EDC17CV54 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 9795 CAT 9.8l diesel

Years2018
Stock power460 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~515 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 9895 13l diesel

Years2016
Stock power457 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~510 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES MF 9895 CAT 9.8L diesel

Years2017
Stock power465 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~520 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

Massey Ferguson COMBINES FAQ

Do you have a tune file for the Massey Ferguson COMBINES?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Massey Ferguson COMBINES file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Massey Ferguson COMBINES Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Massey Ferguson modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Massey Ferguson COMBINES read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.