Supported vehicles › Jaguar › XE

Jaguar · Cars & LCV

Jaguar XE tune files, remaps & software solutions

7 engines · 2015–2015 · 8 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Jaguar XE built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Jaguar XE 2.0 GTDI petrol

ECU / TCU types2
Stage 1 — typical+5% power / +5% torque

Controllers and read methods

  • Bosch MED17.9.7 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch MED17.9.9 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE 2.0 TD diesel

ECU / TCU types1
Stage 1 — typical+20% power / +28% torque

Controllers and read methods

  • Bosch MEDC17.9 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE 2.0d diesel

Years2015
Stock power163–240 hp
Stock torque380–500 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~195–290 hp / 485–640 Nm

Controllers and read methods

  • Bosch EDC17CP42 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Bosch MEDC17.9 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE 2.0T petrol

Years2015
Stock power200–300 hp
Stock torque320–400 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~230–345 hp / 385–480 Nm

Controllers and read methods

  • Bosch MED17.9.9 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE 3.0 SC AJ126 petrol

ECU / TCU types1
Stage 1 — typical+5% power / +5% torque

Controllers and read methods

  • Bosch MED17.8.31 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE 3.0 V6 supercharged petrol

Years2015
Stock power340–380 hp
Stock torque450–460 Nm
ECU / TCU types3
Stage 1 — typical+15% power / +20% torque → ~390–435 hp / 540–550 Nm

Controllers and read methods

  • Bosch MED17.8.3 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Bosch MED17.8.31 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Bosch MED17.8.32 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE 3.0d diesel

Years2015
Stock power300 hp
Stock torque700 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~360 hp / 895 Nm

Controllers and read methods

  • Bosch EDC17CP55 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jaguar XE FAQ

Do you have a tune file for the Jaguar XE?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Jaguar XE file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Jaguar XE Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Jaguar modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Jaguar XE read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.