Supported vehicles › Iveco › Daily

Iveco · Cars & LCV

Iveco Daily tune files, remaps & software solutions

10 engines · 2006–2019 · 9 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Iveco Daily built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Iveco Daily 2.3 HPI diesel

Years2006–2011
Stock power96–126 hp
Stock torque240–320 Nm
ECU / TCU types5
Stage 1 — typical+20% power / +28% torque → ~115–150 hp / 305–410 Nm

Controllers and read methods

  • Bosch EDC16C39 MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC16C8 MPC556 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Bosch EDC17C69 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 2.3 HPT diesel

Years2011–2019
Stock power136 hp
Stock torque320 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~165 hp / 410 Nm

Controllers and read methods

  • Bosch EDC16C39 MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 2.3 JTDm diesel

Years2011
Stock power145–156 hp
Stock torque350 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~175–185 hp / 450 Nm

Controllers and read methods

  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 2.3 Multijet diesel

Years2011–2019
Stock power136–150 hp
Stock torque350 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~165–180 hp / 450 Nm

Controllers and read methods

  • Bosch EDC17C69 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 2.3 Multijet EU6 diesel

Years2019
Stock power136–156 hp
Stock torque370–400 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~165–185 hp / 475–510 Nm

Controllers and read methods

  • Bosch MD1CS069 TC299 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)OBD
  • ZF 8HP75 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 2.8 JTDm diesel

Years2006
Stock power125–147 hp
Stock torque0–290 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~150–175 hp

Controllers and read methods

  • Bosch EDC16C8 MPC556 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 3.0 EU6 diesel

Years2019
Stock power160–210 hp
Stock torque400–470 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~190–250 hp / 510–600 Nm

Controllers and read methods

  • Bosch MD1CS069 TC299 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)OBD
  • ZF 8HP75 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 3.0 HPI diesel

Years2011
Stock power140–146 hp
Stock torque350 Nm
ECU / TCU types4
Stage 1 — typical+20% power / +28% torque → ~170–175 hp / 450 Nm

Controllers and read methods

  • Bosch EDC16C39 MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Bosch EDC17CP52 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily 3.0 HPT diesel

Years2006–2011
Stock power166–204 hp
Stock torque380–470 Nm
ECU / TCU types5
Stage 1 — typical+20% power / +28% torque → ~200–245 hp / 485–600 Nm

Controllers and read methods

  • Bosch EDC16C39 MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC16C8 MPC556 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Bosch EDC17CP52 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily E6 – 3.0 diesel

Years2011–2019
Stock power150–210 hp
Stock torque350–470 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~180–250 hp / 450–600 Nm

Controllers and read methods

  • Bosch DCU17PC43 TC1724 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD (BETA)
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Iveco Daily FAQ

Do you have a tune file for the Iveco Daily?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Iveco Daily file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Iveco Daily Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Iveco modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Iveco Daily read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.