Supported vehicles › Hyundai › Tucson (NX4)
Hyundai · Cars & LCV
Hyundai Tucson (NX4) tune files, remaps & software solutions
4 engines · 4 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more
Custom files for the Hyundai Tucson (NX4) built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.
Hyundai Tucson (NX4) 1.6 T-GDI petrol
Controllers and read methods
- Kefico CPEGD3.20.1 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Pops and bangs, launch and rev-limit changes where the platform allows
- Catalyst, flap and DTC work
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson (NX4) 2.5 GDI petrol
Controllers and read methods
- Vitesco/Continental SIM3K-540 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Pops and bangs, launch and rev-limit changes where the platform allows
- Catalyst, flap and DTC work
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson (NX4) SBW petrol
Controllers and read methods
- Kefico CPSCU1.11.3 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Pops and bangs, launch and rev-limit changes where the platform allows
- Catalyst, flap and DTC work
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson (NX4) TCM petrol
Controllers and read methods
- Kefico CPIMT1.01.1 TCU AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Pops and bangs, launch and rev-limit changes where the platform allows
- Catalyst, flap and DTC work
- TCU shift-point, lock-up and torque-management tuning matched to the engine file
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson (NX4) FAQ
Do you have a tune file for the Hyundai Tucson (NX4)?
Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.
How do I get a Hyundai Tucson (NX4) file?
WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.
What gains will a Hyundai Tucson (NX4) Stage 1 give?
Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.
Send your Hyundai Tucson (NX4) read
WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).
Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.