Supported vehicles › Hyundai › Tucson LM
Hyundai · Cars & LCV
Hyundai Tucson LM tune files, remaps & software solutions
3 engines · 2009–2009 · 5 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more
Custom files for the Hyundai Tucson LM built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.
Hyundai Tucson LM 1.7 CRDI EU5 diesel
Controllers and read methods
- Bosch EDC17C08 TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
- Bosch EDC17C53 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
- Bosch EDC17CP14 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Towing and economy files
- DPF, EGR and AdBlue software solutions, DTC work
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson LM 2.0 CRDI EU5 diesel
Controllers and read methods
- Bosch EDC17C08 TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
- Bosch EDC17C53 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
- Bosch EDC17CP14 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Towing and economy files
- DPF, EGR and AdBlue software solutions, DTC work
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson LM 2.4 MPI petrol
Controllers and read methods
- Continental SIM2K-240 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOT
- Continental SIM2K-241 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD
What we build for this engine
- Stage 1 and Stage 2 calibrations built from your read
- Pops and bangs, launch and rev-limit changes where the platform allows
- Catalyst, flap and DTC work
- WinOLS map packs and DAMOS where we hold our own definitions
Hyundai Tucson LM FAQ
Do you have a tune file for the Hyundai Tucson LM?
Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.
How do I get a Hyundai Tucson LM file?
WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.
What gains will a Hyundai Tucson LM Stage 1 give?
Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.
Send your Hyundai Tucson LM read
WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).
Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.