Supported vehicles › Ford › Focus MkII

Ford · Cars & LCV

Ford Focus MkII tune files, remaps & software solutions

6 engines · 2004–2004 · 12 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Ford Focus MkII built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Ford Focus MkII 1.6 Duratec Ti-VCT petrol

Years2004
Stock power105 hp
Stock torque150 Nm
ECU / TCU types4
Stage 1 — typical+5% power / +5% torque → ~110 hp / 160 Nm

Controllers and read methods

  • Continental EMS2204 TC1738 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Continental EMS2205 TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Continental EMS2208 TC1767 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Continental EMS2211 TC1738 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Ford Focus MkII 1.6 TDCI diesel

Years2004
Stock power90–109 hp
Stock torque215–245 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~110–130 hp / 275–315 Nm

Controllers and read methods

  • Bosch EDC16C3 MPC556 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Bosch EDC16C34 MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Ford Focus MkII 1.6 TDCI EU5 diesel

Years2004
Stock power95 hp
Stock torque230 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~115 hp / 295 Nm

Controllers and read methods

  • Continental SID807evo TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Ford Focus MkII 1.8 TDCI diesel

Years2004
Stock power115 hp
Stock torque279–280 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~140 hp / 355–360 Nm

Controllers and read methods

  • Siemens SID202 MPC563 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Siemens SID206 MPC563 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Ford Focus MkII 2.0 TDCI diesel

Years2004
Stock power110–136 hp
Stock torque250–320 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~130–165 hp / 320–410 Nm

Controllers and read methods

  • Siemens SID206 MPC563 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Siemens SID83A MPC563 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Siemens SID83M MPC563 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Ford Focus MkII 2.5 T Duratec petrol

Years2004
Stock power225–350 hp
Stock torque320–460 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~260–400 hp / 385–550 Nm

Controllers and read methods

  • Bosch ME9.0C MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Ford Focus MkII FAQ

Do you have a tune file for the Ford Focus MkII?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Ford Focus MkII file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Ford Focus MkII Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Ford modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Ford Focus MkII read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.