Supported vehicles › Citroen › SpaceTourer

Citroen · Cars & LCV

Citroen SpaceTourer tune files, remaps & software solutions

3 engines · 2016–2016 · 3 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Citroen SpaceTourer built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Citroen SpaceTourer 1.6 BlueHDI diesel

Years2016
Stock power95–115 hp
Stock torque210–300 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~115–140 hp / 270–385 Nm

Controllers and read methods

  • Bosch EDC17C60 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Citroen SpaceTourer 1.6 BlueHDI S&S diesel

Years2016
Stock power95 hp
Stock torque240 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~115 hp / 305 Nm

Controllers and read methods

  • Bosch EDC17C60 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Citroen SpaceTourer 2.0 BlueHDI diesel

Years2016
Stock power120–180 hp
Stock torque320–400 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~145–215 hp / 410–510 Nm

Controllers and read methods

  • Delphi DCM6.2A MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGS (BETA)OBD
  • Delphi DCM7.1A TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGS (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Citroen SpaceTourer FAQ

Do you have a tune file for the Citroen SpaceTourer?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Citroen SpaceTourer file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Citroen SpaceTourer Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Citroen SpaceTourer read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.