Supported vehicles › Chery › Tiggo 8 Plus

Chery · Cars & LCV

Chery Tiggo 8 Plus tune files, remaps & software solutions

2 engines · 2020–2020 · 2 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Chery Tiggo 8 Plus built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Chery Tiggo 8 Plus 1.6T petrol

Years2020
Stock power194 hp
Stock torque290 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~225 hp / 350 Nm

Controllers and read methods

  • Bosch MG1UD008 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Bosch MG1US008 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Chery Tiggo 8 Plus 2.0T petrol

Years2020
Stock power254 hp
Stock torque390 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~290 hp / 470 Nm

Controllers and read methods

  • Bosch MG1UD008 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Bosch MG1US008 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Chery Tiggo 8 Plus FAQ

Do you have a tune file for the Chery Tiggo 8 Plus?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Chery Tiggo 8 Plus file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Chery Tiggo 8 Plus Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Chery Tiggo 8 Plus read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.