Supported vehicles › Audi › A7 C8

Audi · Cars & LCV

Audi A7 C8 tune files, remaps & software solutions

11 engines · 2018–2018 · 13 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Audi A7 C8 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Audi A7 C8 40 TDI (2.0) diesel

Years2018
Stock power204 hp
Stock torque400 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~245 hp / 510 Nm

Controllers and read methods

  • Bosch MD1CP004 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MD1CS004 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 40 TFSI (2.0) petrol

Years2018
Stock power252 hp
Stock torque370 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~290 hp / 445 Nm

Controllers and read methods

  • Bosch MG1CS001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 40 TFSI (2.0) MHEV petrol

Years2018
Stock power204 hp
Stock torque320 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~235 hp / 385 Nm

Controllers and read methods

  • Continental Simos19.7 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 45 TDI (3.0) diesel

Years2018
Stock power231–245 hp
Stock torque500 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~275–295 hp / 640 Nm

Controllers and read methods

  • Bosch MD1CP004 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MD1CS014 TC299 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 45 TFSI (2.0) petrol

Years2018
Stock power245 hp
Stock torque350–370 Nm
ECU / TCU types4
Stage 1 — typical+15% power / +20% torque → ~280 hp / 420–445 Nm

Controllers and read methods

  • Bosch MG1CS001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Continental Simos18.4 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Continental Simos19.3 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 45 TFSI (2.0) MHEV petrol

Years2018
Stock power265 hp
Stock torque370 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~305 hp / 445 Nm

Controllers and read methods

  • Continental Simos19.7 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 50 TDI (3.0) diesel

Years2018
Stock power286 hp
Stock torque620 Nm
ECU / TCU types4
Stage 1 — typical+20% power / +28% torque → ~345 hp / 795 Nm

Controllers and read methods

  • Bosch MD1CP004 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MD1CS014 TC299 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)OBD
  • ZF ALx52 TCU SH72568, SH72569 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • ZF ALx52 Gen2 TCU SH72569 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 50 TFSIe (2.0) EU6d hybrid_petrol

Years2018
Stock power299 hp
Stock torque450 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~345 hp / 540 Nm

Controllers and read methods

  • Continental Simos19.8 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 55 TFSI (3.0) petrol

Years2018
Stock power340 hp
Stock torque500 Nm
ECU / TCU types3
Stage 1 — typical+15% power / +20% torque → ~390 hp / 600 Nm

Controllers and read methods

  • Bosch MG1CS002 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • ZF ALx52 TCU SH72568, SH72569 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • ZF ALx52 Gen2 TCU SH72569 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 55 TFSI e (2.0) hybrid_petrol

Years2018
Stock power367 hp
Stock torque500 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~420 hp / 600 Nm

Controllers and read methods

  • Continental Simos19.2 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 55 TFSIe (2.0) EU6d hybrid_petrol

Years2018
Stock power367 hp
Stock torque500 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~420 hp / 600 Nm

Controllers and read methods

  • Continental Simos19.8 TC297 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C8 FAQ

Do you have a tune file for the Audi A7 C8?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Audi A7 C8 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Audi A7 C8 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Audi A7 C8 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.