Supported vehicles › Seat › Leon

Seat · Cars & LCV

Seat Leon tune files, remaps & software solutions

10 engines · 2020–2020 · 13 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Seat Leon built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Seat Leon 1.0 eTSI petrol

Years2020
Stock power110 hp
Stock torque200 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~125 hp / 240 Nm

Controllers and read methods

  • Bosch MED17.1.27 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 1.0 TSI/TFSI petrol

Years2020
Stock power110 hp
Stock torque200 Nm
ECU / TCU types3
Stage 1 — typical+15% power / +20% torque → ~125 hp / 240 Nm

Controllers and read methods

  • Bosch MED17.1.27 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MED17.5.21 TC1782 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Temic DQ200G2 TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 1.4 TSI e-HYBRID hybrid_petrol

Years2020
Stock power204 hp
Stock torque350 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~235 hp / 420 Nm

Controllers and read methods

  • Bosch MG1CS211 TC387 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 1.5 eTSI petrol

Years2020
Stock power150 hp
Stock torque250 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~175 hp / 300 Nm

Controllers and read methods

  • Temic DQ200 (MQB) TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Temic DQ200G2 TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 1.5 TGI petrol

Years2020
Stock power130 hp
Stock torque200 Nm
ECU / TCU types3
Stage 1 — typical+5% power / +5% torque → ~135 hp / 210 Nm

Controllers and read methods

  • Bosch MG1CS011 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • Temic DQ200 (MQB) TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Temic DQ200G2 TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 1.5 TSI petrol

Years2020
Stock power150 hp
Stock torque250 Nm
ECU / TCU types5
Stage 1 — typical+15% power / +20% torque → ~175 hp / 300 Nm

Controllers and read methods

  • Bosch DQ380 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Bosch DQ381 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch MG1CS011 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH-PATCHBENCH (REMOTE UNLOCK)DATALOGSOBD
  • Temic DQ200 (MQB) TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Temic DQ200G2 TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 2.0 TDI CR EU6 diesel

Years2020
Stock power115–150 hp
Stock torque300–360 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~140–180 hp / 385–460 Nm

Controllers and read methods

  • Bosch DQ381 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC17C74 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch MD1CS004 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 2.0 TDI CR EU6.2 diesel

Years2020
Stock power150 hp
Stock torque340 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~180 hp / 435 Nm

Controllers and read methods

  • Bosch DQ381 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch MD1CS004 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)DATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 2.0 TFSI OPF petrol

Years2020
Stock power190 hp
Stock torque320 Nm
ECU / TCU types4
Stage 1 — typical+15% power / +20% torque → ~220 hp / 385 Nm

Controllers and read methods

  • Bosch DQ380 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Bosch DQ381 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch MG1CS001 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch MG1CS111 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon 2.0 TSI EU6d petrol

Years2020
Stock power190 hp
Stock torque320 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~220 hp / 385 Nm

Controllers and read methods

  • Bosch DQ381 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch MG1CS031 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (REMOTE UNLOCK)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Seat Leon FAQ

Do you have a tune file for the Seat Leon?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Seat Leon file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Seat Leon Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Seat Leon read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.