Supported vehicles › New Holland › AGRICULTURE T8

New Holland · Agricultural

New Holland AGRICULTURE T8 tune files, remaps & software solutions

7 engines · 2012–2020 · 2 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the New Holland AGRICULTURE T8 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

New Holland AGRICULTURE T8 T8.320 8.7l diesel

Years2015
Stock power286 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~320 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 T8.350 8.7l diesel

Years2015–2020
Stock power315 hp
Stock torque0 Nm
ECU / TCU types2
Stage 1 — typical+12% power / +15% torque → ~355 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)
  • Bosch MD1CE101 TC299 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)OBD (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 T8.355 8.7l diesel

Years2012
Stock power358 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~400 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 T8.380 8.7l diesel

Years2015–2020
Stock power347 hp
Stock torque0 Nm
ECU / TCU types2
Stage 1 — typical+12% power / +15% torque → ~390 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)
  • Bosch MD1CE101 TC299 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (REMOTE UNLOCK)OBD (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 T8.385 8.7l diesel

Years2012–2018
Stock power340 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~380 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 T8.410 8.7l diesel

Years2015
Stock power375 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~420 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 T8.435 8.7l diesel

Years2015
Stock power416 hp
Stock torque0 Nm
ECU / TCU types1
Stage 1 — typical+12% power / +15% torque → ~465 hp

Controllers and read methods

  • Bosch EDC17CV41 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)BOOT (BETA)

What we build for this engine

  • Power and torque uprates kept inside the engine’s comfortable limits
  • EGR, DPF and SCR/AdBlue software solutions with the diagnostic side handled properly
  • Speed and rpm limiter changes, DTC work and derate fixes
  • WinOLS map packs and DAMOS where we hold our own definitions

New Holland AGRICULTURE T8 FAQ

Do you have a tune file for the New Holland AGRICULTURE T8?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a New Holland AGRICULTURE T8 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a New Holland AGRICULTURE T8 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your New Holland AGRICULTURE T8 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.