Supported vehicles › Kia › Stonic (KX1)

Kia · Cars & LCV

Kia Stonic (KX1) tune files, remaps & software solutions

4 engines · 2017–2017 · 8 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Kia Stonic (KX1) built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Kia Stonic (KX1) 1.0 T-GDI petrol

Years2017
Stock power100–120 hp
Stock torque172 Nm
ECU / TCU types5
Stage 1 — typical+15% power / +20% torque → ~115–140 hp / 205 Nm

Controllers and read methods

  • Kefico CPEGD2.20.1 TC1782 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Kefico CPEGD2.20.2 TC1782 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Kefico CPEGD2.20.3 TC1782 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Kefico CPEGD2.20.4 TC1782 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Kefico CPEGD3.20.1 TC277 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Kia Stonic (KX1) 1.2 MPI EU6 petrol

Years2017
Stock power84 hp
Stock torque118 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~90 hp / 125 Nm

Controllers and read methods

  • Kefico CPEGP3.20.2 TC275 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD
  • Kefico CPGPSH3.24.1 TC275 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Kia Stonic (KX1) 1.4i petrol

Years2017
Stock power100 hp
Stock torque133 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~105 hp / 140 Nm

Controllers and read methods

  • Kefico CPEGD2.20.1 TC1782 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Kia Stonic (KX1) 1.6 CRDI EU6 diesel

Years2017
Stock power110 hp
Stock torque260 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~130 hp / 335 Nm

Controllers and read methods

  • Bosch EDC17C57 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Kia Stonic (KX1) FAQ

Do you have a tune file for the Kia Stonic (KX1)?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Kia Stonic (KX1) file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Kia Stonic (KX1) Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Kia Stonic (KX1) read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.