Supported vehicles › Jeep › Cherokee

Jeep · Cars & LCV

Jeep Cherokee tune files, remaps & software solutions

15 engines · 2001–2019 · 15 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Jeep Cherokee built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

Jeep Cherokee 2.0 JTDm diesel

Years2014
Stock power140–170 hp
Stock torque350 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~170–205 hp / 450 Nm

Controllers and read methods

  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD (BETA)
  • Bosch EDC17C79 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.0 Turbo petrol

ECU / TCU types1
Stage 1 — typical+15% power / +20% torque

Controllers and read methods

  • Continental GPEC4/GPEC4LM AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.0T GME Hurricane petrol

Years2019
Stock power270 hp
Stock torque400 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~310 hp / 480 Nm

Controllers and read methods

  • Continental GPEC4 MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.2 JTDm diesel

Years2014
Stock power184 hp
Stock torque440 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~220 hp / 565 Nm

Controllers and read methods

  • Bosch EDC17C69 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.2 Multijet EU6d diesel

Years2019
Stock power150–200 hp
Stock torque350–450 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~180–240 hp / 450–575 Nm

Controllers and read methods

  • Bosch EDC17C69 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.4 petrol

Years2014
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque

Controllers and read methods

  • Continental GPEC2A/GPEC3 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.4 Multi-Air petrol

Years2019
Stock power180 hp
Stock torque237 Nm
ECU / TCU types3
Stage 1 — typical+5% power / +5% torque → ~190 hp / 250 Nm

Controllers and read methods

  • Continental GPEC2 MPC5566 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH
  • Continental GPEC2A MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH
  • Continental GPEC3 MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.4 Tigershark petrol

Years2014
Stock power184 hp
Stock torque232 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~195 hp / 245 Nm

Controllers and read methods

  • Continental GPEC2A MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.5 CRD diesel

Years2001
Stock power143 hp
Stock torque312 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~170 hp / 400 Nm

Controllers and read methods

  • Bosch EDC15C5 C167 (29F400) AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 2.8 CRD diesel

Years2001–2010
Stock power150–200 hp
Stock torque360–410 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~180–240 hp / 460–525 Nm

Controllers and read methods

  • Bosch EDC15C5 C167 (29F400) AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)
  • Bosch EDC16CP31 MPC564 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC17CP27 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 3.0 CRD V6 diesel

Years2005
Stock power218 hp
Stock torque510 Nm
ECU / TCU types1
Stage 1 — typical+20% power / +28% torque → ~260 hp / 655 Nm

Controllers and read methods

  • Bosch EDC16CP31 MPC564 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 3.2 Pentastar V6 petrol

Years2014
Stock power275 hp
Stock torque324 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~290 hp / 340 Nm

Controllers and read methods

  • Continental GPEC2A MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH
  • Continental GPEC4 MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 4xe (2.0T) hybrid_petrol

Years2019
Stock power375 hp
Stock torque637 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~430 hp / 765 Nm

Controllers and read methods

  • Continental GPEC4 MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH (BETA)
  • ZF 8P75PH TCU SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 6.1 SRT8 petrol

Years2005
Stock power425 hp
Stock torque569 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~445 hp / 595 Nm

Controllers and read methods

  • Continental GPEC2A MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee 6.4 V8 SRT8 petrol

Years2010
Stock power477 hp
Stock torque637 Nm
ECU / TCU types5
Stage 1 — typical+5% power / +5% torque → ~500 hp / 670 Nm

Controllers and read methods

  • Continental GPEC2 MPC5566 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH
  • Continental GPEC2A MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH
  • Continental GPEC3 MPC5674F AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD-PATCH (BETA)
  • Motorola NGC4A MPC5554 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)
  • ZF 8HP70 TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Jeep Cherokee FAQ

Do you have a tune file for the Jeep Cherokee?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Jeep Cherokee file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Jeep Cherokee Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All Jeep modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your Jeep Cherokee read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.