Supported vehicles › BMW › 1-serie F40

BMW · Cars & LCV

BMW 1-serie F40 tune files, remaps & software solutions

8 engines · 2019–2019 · 6 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the BMW 1-serie F40 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

WhatsApp 0466 659 997
Check availability at tacfiles.com

BMW 1-serie F40 16d (1.5) diesel

Years2019
Stock power116 hp
Stock torque270 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~140 hp / 345 Nm

Controllers and read methods

  • Bosch EDC17C50 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch MD1CS001 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 18d EU6d diesel

Years2019
Stock power150 hp
Stock torque350 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~180 hp / 450 Nm

Controllers and read methods

  • Bosch MD1CS001 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • ZF 8HPxx TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 18i (1.5T) EU6d petrol

Years2019
Stock power136–140 hp
Stock torque220 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~145–145 hp / 230 Nm

Controllers and read methods

  • Bosch MG1CS201 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 20d EU6d diesel

Years2019
Stock power190 hp
Stock torque400 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~230 hp / 510 Nm

Controllers and read methods

  • Bosch EDC17C50 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch MD1CS001 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • ZF 8HPxx TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 20i (2.0T) petrol

Years2019
Stock power178 hp
Stock torque280 Nm
ECU / TCU types3
Stage 1 — typical+5% power / +5% torque → ~185 hp / 295 Nm

Controllers and read methods

  • Bosch MG1CS024 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MG1CS201 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • ZF 8HPxx TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 25i 2.0 petrol

Years2019
Stock power231 hp
Stock torque350 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~265 hp / 420 Nm

Controllers and read methods

  • Bosch MG1CS003 SPC5777M AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 28ti (2.0T) petrol

Years2019
Stock power265 hp
Stock torque400 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~305 hp / 480 Nm

Controllers and read methods

  • Bosch MG1CS024 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MG1CS201 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 35i (2.0T) petrol

Years2019
Stock power306 hp
Stock torque450 Nm
ECU / TCU types3
Stage 1 — typical+15% power / +20% torque → ~350 hp / 540 Nm

Controllers and read methods

  • Bosch MG1CS024 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Bosch MG1CS201 TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • ZF 8HPxx TCU SH72549, SH7254x AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

BMW 1-serie F40 FAQ

Do you have a tune file for the BMW 1-serie F40?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a BMW 1-serie F40 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a BMW 1-serie F40 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Related

All BMW modelsAll supported vehiclesSupported ECU typesFor tuners & workshopsTune file service

Send your BMW 1-serie F40 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

WhatsApp 0466 659 997
Check availability at tacfiles.com

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.