Supported vehicles › Audi › A7 C7

Audi · Cars & LCV

Audi A7 C7 tune files, remaps & software solutions

9 engines · 2010–2010 · 23 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Audi A7 C7 built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Audi A7 C7 2.0 TFSI petrol

Years2010
Stock power252 hp
Stock torque370 Nm
ECU / TCU types5
Stage 1 — typical+15% power / +20% torque → ~290 hp / 445 Nm

Controllers and read methods

  • Continental Simos18.1 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.4 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxDATALOGSOBD
  • Continental Simos18.6 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Temic DL501 TCU TC1766, TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 2.0 TSI petrol

Years2010
Stock power300 hp
Stock torque380 Nm
ECU / TCU types9
Stage 1 — typical+15% power / +20% torque → ~345 hp / 455 Nm

Controllers and read methods

  • Bosch DQ381 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Continental Simos12.1 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Continental Simos12.2 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Continental Simos18.1 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.10 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.2 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.3 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Continental Simos18.6 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTDATALOGSOBD
  • Temic DQ250 (MQB) TCU TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 2.8 FSI petrol

Years2010
Stock power204 hp
Stock torque280 Nm
ECU / TCU types1
Stage 1 — typical+5% power / +5% torque → ~215 hp / 295 Nm

Controllers and read methods

  • Continental Simos8.10 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 3.0 TDI diesel

Years2010
Stock power245–313 hp
Stock torque500–650 Nm
ECU / TCU types6
Stage 1 — typical+20% power / +28% torque → ~295–375 hp / 640–830 Nm

Controllers and read methods

  • Bosch EDC17CP04 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTOBD
  • Bosch EDC17CP44 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch MD1CP004 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Temic DL501 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD
  • ZF ALx51 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD
  • ZF ALx52 TCU SH72568, SH72569 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 3.0 TDI EU6 diesel

Years2010
Stock power272–326 hp
Stock torque580–650 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~325–390 hp / 740–830 Nm

Controllers and read methods

  • Bosch EDC17CP44 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch EDC17CP54 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • ZF ALx51 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 3.0 TDI EU6 (FWD) diesel

Years2010
Stock power204–218 hp
Stock torque400 Nm
ECU / TCU types4
Stage 1 — typical+20% power / +28% torque → ~245–260 hp / 510 Nm

Controllers and read methods

  • Bosch EDC17CP44 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch EDC17CP54 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • ZF ALx51 TCU SH72549 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 3.0 TDI EU6 (Quattro) diesel

Years2010
Stock power190–218 hp
Stock torque450–500 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~230–260 hp / 575–640 Nm

Controllers and read methods

  • Bosch EDC17CP44 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD
  • Bosch MD1CP004 SPC5777M, TC298 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHDATALOGSOBD
  • Temic DL382 TCU TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 3.0 TFSI petrol

Years2010
Stock power310–333 hp
Stock torque420–440 Nm
ECU / TCU types4
Stage 1 — typical+15% power / +20% torque → ~355–385 hp / 505–530 Nm

Controllers and read methods

  • Continental Simos16.11 TC1791 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBOOTOBD
  • Continental Simos8.4 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Continental Simos8.5 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Temic DL501 TCU TC1766, TC1784 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBENCH (BETA)OBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • TCU shift-point, lock-up and torque-management tuning matched to the engine file
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 40 TFSI petrol

Years2010
Stock power333 hp
Stock torque440 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~385 hp / 530 Nm

Controllers and read methods

  • Continental Simos8.3 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Continental Simos8.5 TC1796 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Audi A7 C7 FAQ

Do you have a tune file for the Audi A7 C7?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Audi A7 C7 file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Audi A7 C7 Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Audi A7 C7 read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.