Supported vehicles › Alfa Romeo › Giulietta

Alfa Romeo · Cars & LCV

Alfa Romeo Giulietta tune files, remaps & software solutions

11 engines · 2010–2016 · 13 ECU/TCU types · files for Autotuner, KESS3, Flex, Dimsport DFOX / New Genius, PCMflash, MMCFlash, BitBox and more

Custom files for the Alfa Romeo Giulietta built in WinOLS from your own read — not a generic file pulled from a database. Send the read from your tool and Josh builds the calibration for your exact software version, usually back within 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST), and supports it afterwards. Typical Stage 1 figures are shown per engine below and confirmed per calibration.

Alfa Romeo Giulietta 1.4 Multi-Air petrol

Years2010–2016
Stock power150–170 hp
Stock torque250 Nm
ECU / TCU types3
Stage 1 — typical+15% power / +20% torque → ~175–195 hp / 300 Nm

Controllers and read methods

  • Marelli 8GMF MPC5553, MPC5565 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Marelli 8GMK SPC564A80 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Marelli 8GMK.Fx SPC564A80 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1.4 Multiair petrol

ECU / TCU types2
Stage 1 — typical+15% power / +20% torque

Controllers and read methods

  • Marelli 8GMF HW503 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Marelli 8GMK AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1.4 T-Jet petrol

Years2010
Stock power105–115 hp
Stock torque200–206 Nm
ECU / TCU types2
Stage 1 — typical+15% power / +20% torque → ~120–130 hp / 240–245 Nm

Controllers and read methods

  • Bosch ME17.3.0 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch ME7.9.10 ST10F275 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1.4 T-Jet EU5 petrol

Years2010
Stock power120 hp
Stock torque201 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~140 hp / 240 Nm

Controllers and read methods

  • Bosch ME7.9.10 ST10F275 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1.4 T-Jet EU6 petrol

Years2016
Stock power120 hp
Stock torque215 Nm
ECU / TCU types1
Stage 1 — typical+15% power / +20% torque → ~140 hp / 260 Nm

Controllers and read methods

  • Bosch ME17.3.0 TC1724 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1.6 JTD diesel

ECU / TCU types2
Stage 1 — typical+20% power / +28% torque

Controllers and read methods

  • Bosch EDC17C49 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch EDC17C69 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1.6 JTDm diesel

Years2010–2016
Stock power105–120 hp
Stock torque320 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~125–145 hp / 410 Nm

Controllers and read methods

  • Bosch EDC16C39 (CAN) MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Bosch EDC17C69 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 1750 TBI petrol

Years2010
Stock power235–240 hp
Stock torque340–350 Nm
ECU / TCU types2
Stage 1 — typical+5% power / +5% torque → ~245–250 hp / 355–370 Nm

Controllers and read methods

  • Bosch MED17.3.1 TC1766 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch MED17.3.3 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOTDATALOGSOBD

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Pops and bangs, launch and rev-limit changes where the platform allows
  • Catalyst, flap and DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 2.0 JTD diesel

ECU / TCU types2
Stage 1 — typical+20% power / +28% torque

Controllers and read methods

  • Bosch EDC17C49 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH
  • Bosch EDC17C69 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCH

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 2.0 JTDm diesel

Years2010
Stock power140–170 hp
Stock torque320–350 Nm
ECU / TCU types3
Stage 1 — typical+20% power / +28% torque → ~170–205 hp / 410–450 Nm

Controllers and read methods

  • Bosch EDC16C39 (K-Line) MPC562 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHOBD
  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)
  • Bosch EDC17C79 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxOBD (BETA)

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta 2.0 JTDm EU6 diesel

Years2016
Stock power150–175 hp
Stock torque320–350 Nm
ECU / TCU types2
Stage 1 — typical+20% power / +28% torque → ~180–210 hp / 410–450 Nm

Controllers and read methods

  • Bosch EDC17C49 TC1797 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT
  • Bosch EDC17C69 TC1793 AutotunerKESS3FlexDFOXPCMflashbFlashBitBoxBENCHBOOT

What we build for this engine

  • Stage 1 and Stage 2 calibrations built from your read
  • Towing and economy files
  • DPF, EGR and AdBlue software solutions, DTC work
  • WinOLS map packs and DAMOS where we hold our own definitions

Alfa Romeo Giulietta FAQ

Do you have a tune file for the Alfa Romeo Giulietta?

Yes — for every engine and ECU listed above. Files are built from your own read in WinOLS for your exact software version, not supplied from a generic database.

How do I get a Alfa Romeo Giulietta file?

WhatsApp the read to 0466 659 997 with the engine, ECU, your tool and what you want, or upload it at tacfiles.com for an automated return where a matching project exists.

What gains will a Alfa Romeo Giulietta Stage 1 give?

Typical Stage 1 figures are shown on each engine card above — measured on our dyno where marked, otherwise the typical gain for that engine class. Final numbers depend on the calibration and hardware, so we confirm per file. Reliability comes first — files stay inside what the engine, injectors and cooling handle comfortably.

Send your Alfa Romeo Giulietta read

WhatsApp 0466 659 997 with the engine, ECU, your tool and what you want. Hand-built files typically return in 10–20 minutes during file-service hours (9am–9pm Mon–Sat AEST).

Vehicle, ECU and read-method data compiled from the published compatibility lists of the flashing tools we work with (files are returned for Autotuner, KESS3, Flex, DFOX, PCMflash, bFlash, BitBox and more). Stock figures are manufacturer-published values as listed by those tools and may vary by market. All tuning files are intended for off-road, motorsport, agricultural or commercial use only; it is the responsibility of the vehicle owner to ensure compliance with local regulations.